Description
350W Topcon Half Cut PV Solar Panel is a tier-one product featuring outstanding performance and mechanical warranties.
AA Solar's Outstanding Warranties:
- 25-year Performance Warranty to 80%
- 10-year Performance Warranty to 90%
- 5-year Warranty Against Production and Material Defects
This product must be installed by a registered electrician with a parallel generation/solar endorsement (from September 1st 2025) who can issue a Certificate of Compliance and Electrical Safety Certificate for completed work. AA Solar can provide this comprehensive service. Alternatively, we can work with your chosen providing them with the products' Supplier Declaration of Compliance (SDoC) and the supporting documentation they need. This excludes mobile, motorhome, and marine installs that do not require 230V AC componentry.
TOPCon - Tunnel Oxide Passivated Contact
A TOPCon solar panel is a high-efficiency photovoltaic panel that uses Tunnel Oxide Passivated Contact (TOPCon) technology to reduce electron recombination and boost energy conversion efficiency compared to traditional PERC panels.
Half-Cut Solar Cells
Half-cell solar panels feature cells cut in half, reducing electrical resistance and mechanical stress—this design increases durability, minimizes energy loss, and allows the top and bottom halves to operate independently for higher performance, especially in partial shade.
AA Solar Selection
AA Solar has been supplying Solar Panels to the New Zealand market for over 20 years. Over this time, we have used, researched and tested many solar panels from a variety of manufacturers and believe their range today is the best quality A-grade panels that can be found. Our extensive first-hand experience with these panels over the years is evidence that these panels will perform as per specification over their 25-year life span. In addition, AA Solar backs these products with warranties so our customers can enjoy the benefits and peace of mind knowing that your 350W Half Cut Topcon PV Solar Panel can be relied on now and for many years to come.
Specifications
| Electrical Data STC |
|---|
| Peak Power (Pmax) | 350W |
| Maximum Power Voltage (Vmp) | 22.50V |
| Maximum Power Current (Imp) | 15.55A |
| Open Circuit Voltage (Voc) | 25.90V |
| Short Circuit Current (Isc) | 17.66A |
| Module Efficiency | 20.08% |
| Temperature & Maximum Rating |
|---|
| Maximum System Voltage | 1000V |
| Power Tolerance | 0~+3% |
| Voc Temperature Coefficients (V/°C) | -0.350 %/°C |
| Isc Temperature Coefficients (A/°C) | +0.065 %/°C |
| Mechanical Characteristics |
|---|
| Cell Type | Topcon |
| No. of Cells | 72 (4x18) |
| Dimensions | 1980x880x30mm |
| Weight | 17.40kg |
| Front Glass | 3.2mm safety glass |
| Frame | Anodized Aluminium |
| Junction Box | IP65 |
| Output Cables | 4mm² cable 90cm (Including MC4 connector) |
SEANZ Authorised Installers
As an authorised SEANZ Parts Supplier and Installer, we require all solar parts covered by AS/NZS Standards 4509, 4777, 5033 and 5139. (This excludes mobile or motorhomes and marine kitsets/products that do not require 230V AC componentry), to be sent to a SEANZ-authorised installer, registered electrician, or professional installer with parallel generation/solar endorsement (from September 1st, 2025) to ensure all safety standards are met and to remove all potential risks and dangers for the end consumer.
Please call us on 09 887 9767 to discuss the legal requirements for system design, installations, and commissioning. This includes the Supplier Declaration of Compliance (SDoC), Certificate of Compliance (CoC), Electrical Safety Certificate (ESC), Record of Inspection (ROI), Distributed Generation Application (DG Application) under the EDB network (Electrical Distribution Business), and the electricity retailer's approval.
- The installer must provide a Certificate of Compliance (CoC) for the work they completed to ensure the installation is compliant with 5033, 4777, and 4509. (where applicable and within 20 working days)
- An independent inspector must inspect the installation and complete the Record of Inspection. (ROI). Within 20 working days
- The installing electrician or inspector must also sign an Electrical Safety Certificate (ESC) before final connection to the network.
- The registered electrician signing off the COC and or ESC must have a mains parallel generator endorsement on their practising licence (from September 1st 2025)
- It is the inspector's responsibility to enter the ROI on the High-Risk database within 20 working days of issuing the ROI.
We can arrange everything for you or work with your chosen qualified solar installer.
